Phone: 86-182 2183 9161   Email: grlingsh@163.com
Home / Engineering case
  • Falling film evaporator

    I. Scope of application: The falling mode evaporator is suitable for the concentration of heat-sensitive materials such as fresh milk, fruit juice, soy milk, xylitol, sorbitol, Vc, honey, starch sugar, fructose, glucose, Chinese herbal extracts, etc. The equipment operates in a vacuum state, the materials evaporate at a low temperature, and the heating time is short. It can maintain the original flavor of the materials to the maximum extent, and continuously enter and exit the materials. It is easy to operate, maintain and clean. It is widely used in food, pharmaceutical, chemical, environmental protection and other fields. System composition: each effect heating evaporator, each effect separator, condenser, heat pressure pump, sterilizer, heat preservation tube, vacuum system, each effect liquid transfer pump, condensation drainage pump, operation platform, electrical instrument control cabinet And valves, pipelines and other systems. Third, the main features: 1. 1. The whole system has reasonable and beautiful design, stable operation, high efficiency and energy saving, and low steam consumption; 2. Large concentration ratio, falling film evaporation, make the material liquid with high viscosity easy to flow, evaporation and short concentration time; 3. Special Design Read More

  • Forced circulation evaporator

    Forced Circulation Evaporator I. Overview: The forced circulation evaporator is a material that is conveyed into a tube heater by a large-flow circulation pump. After heating, it enters the separator for evaporation and separation. The unevaporated surplus material is returned to the circulation pump for transportation It is heated and evaporated by the heater, which forms a repeated circulation evaporation system, which is widely used in the evaporation and concentration of aqueous or organic phase solutions in food, medicine, chemical, environmental protection and other industries. It is especially suitable for high viscosity, easy to scale, and crystalline materials. Intermittent or continuous evaporation and concentration of crystals under normal pressure or vacuum conditions can be single-effect or multi-effect evaporation and concentration crystals. 2. Scope of use: The forced circulation evaporator is suitable for the treatment of materials such as scaling, crystallinity, heat sensitivity (low temperature), high concentration, high viscosity, and insoluble solids with particles. It is a variety of fruit pulp (tomato Sauce), corn steep water, inorganic salts (ammonium sulfate, sodium chloride, etc.), maltodon, starch sugar, glucose, Vc, lysine, low Read More

  • mvr evaporator

    The MVR evaporator uses the secondary steam generated in the evaporator, and the mechanical steam is recompressed. The MVR evaporator is compressed by the compressor, the pressure and temperature increase, and the enthalpy increases, and then it is sent to the heating chamber of the evaporator to be used as heating steam. , So that the liquid material maintains the boiling state, and the heating steam itself condenses into water. In this way, the steam to be discarded is fully used, the latent heat is recovered, and the thermal efficiency is improved. The economic efficiency of steam generation is equal to 31 effects of multi-effect evaporation, which reduces the requirements for external heating and cooling resources, reduces power consumption, and reduces pollution. a. Scope of application: Mechanical vapor recompression (MVR) evaporator, suitable for milk, glucose, organic acid, VC, xylose, pharmaceutical, chemical, bioengineering, environmental protection engineering, waste liquid recovery, papermaking, salt making and other industries Concentrated at low temperature. In particular, materials with lower boiling points or thin materials that are easy to evaporate. b. System composition: Read More

  • Scraper type thin film evaporator

    I. Overview: The scraper type thin film evaporator is a high-efficiency evaporation and distillation device that uses high rotation to distribute liquid into a uniform thin film for evaporation or distillation. It can also perform unit operations such as deodorization, defoaming reaction, heating, and cooling. Used in Chinese and Western pharmaceutical, food, light industry, petroleum, chemical, environmental protection and other industries. 2. Scope of application: Suitable for high-concentration, high-viscosity, heat-sensitive, scale-prone materials, such as: honey, fructose, gravy, pigments, flavors and fragrances, enzyme preparations, lactic acid, silicone polymers, antibiotics, syrups, etc. The liquid was concentrated by evaporation. Third, the equipment features: This equipment uses a centrifugal sliding groove rotor, which is the latest foreign structure of the evaporator. It can form a thin film even when the flow is very small. The deposits on the inner wall surface of the evaporation section of the cylinder can be deposited. Quickly removed by the movable scraper, it has the following properties and characteristics: 1. High heat transfer coefficient value, large evaporation capacity, the strength of the evaporator can reach 2 Read More

  • Three-effect falling film evaporator

    I. Scope of application: The falling mode evaporator is suitable for the concentration of heat-sensitive materials such as fresh milk, fruit juice, soy milk, xylitol, sorbitol, Vc, honey, starch sugar, fructose, glucose, Chinese herbal extracts, etc. The equipment operates in a vacuum state, the materials evaporate at a low temperature, and the heating time is short. It can maintain the original flavor of the materials to the maximum extent, and continuously enter and exit the materials. It is easy to operate, maintain and clean. It is widely used in food, pharmaceutical, chemical, environmental protection and other fields. System composition: each effect heating evaporator, each effect separator, condenser, heat pressure pump, sterilizer, heat preservation tube, vacuum system, each effect liquid transfer pump, condensation drainage pump, operation platform, electrical instrument control cabinet And valves, pipelines and other systems. Third, the main features: 1. 1. The whole system has reasonable and beautiful design, stable operation, high efficiency and energy saving, and low steam consumption; 2. Large concentration ratio, falling film evaporation, which makes the liquid with larger viscosity easy to flow and evaporate, and the concentration time is short; 3. Special design Read More

Professional, dedicated and dedicated to provide customers and human survival with the best optimization solutions for environmental governance

Ge Yi (Shanghai) Environmental Technology Co., Ltd.

Scientific innovation, technology first, people-oriented, customer first
 

Quick Links

Product Category

Contact Us

R & D Center AddressBuilding 206, No.2 Enterprise Technology Park, No.585 Jinbi Road, Jinhui Town, Fengxian District, Shanghai
Factory address1058 North Chuhua Road, Zhelin Town, Fengxian District, Shanghai
021-3178-1287
grlingsh@163.com
021-3107 -6007

 
Copyright  2020 Grid (Shanghai) Environmental Technology Co., Ltd. Technical Support:Leadong 沪 ICP 备 17030243 号 -3